How to Fix A Stove That Wont Turn On

The first step to fixing a stove that won’t turn on is to examine the oven control board for any signs of burning or shorts. Next, check the surface burner element and the safety valve. If there is a problem with these components, the igniter may have to be replaced.

Possible Causes For Stove Not Turning On

There are several possible causes for a stove not turning on. Here are a few:

  1. Electrical issues: If the stove is not turning on, it could be due to an issue with the electrical supply. Make sure that the outlet is working and that the stove is plugged in properly.
  2. Burner issues: If only one burner is not turning on, the problem could be with the burner itself. Make sure that the burner is properly aligned and that it is not clogged with food or debris.
  3. Igniter issues: If the burners are not lighting, the problem could be with the igniter. The igniter is the small wire that sparks when you turn on the burner. If the igniter is not functioning properly, the burner will not light.
  4. Control panel issues: If the stove is not turning on at all, the problem could be with the control panel. The control panel is the part of the stove that allows you to set the temperature and turn the stove on and off. If the control panel is not functioning properly, the stove will not turn on.
  5. Gas supply issues: If the stove is a gas stove, the problem could be with the gas supply. Make sure that the gas valve is open and that there are no leaks in the gas line.

It is always best to consult the owner’s manual or a professional if you are unsure how to diagnose or fix the problem with your stove.

Replace the igniter

If your stove doesn’t light, it might be time to replace the igniter. While the stove may be able to function without it, the igniter is a critical element of the appliance. It provides the high-voltage electrical pulse that sends the ceramic-and-metal igniter.

The igniter itself should be easily removable. You can do this with a Phillips head screwdriver.

Alternatively, you can take your oven apart and check the igniter wire. If you can find a spare igniter wire, it’s worth swapping it for the one you have. This can prevent you from having to replace the entire ignition assembly.

A multimeter can help you test the sparking mechanism of your stove. It can also tell you if your switch needs to be replaced. However, you’ll need to make sure you buy the proper type of wire.

When you have replaced the igniter, you should also check for damage. This is particularly important if your sparks are not blue or white. Discoloration on the coil can indicate a failure.

In addition, you should be careful not to drop the igniter. An accidental drop could render the igniter useless.

Lastly, you should clean the igniter. You can use a Q-tip with rubbing alcohol to remove debris. You can also dry the igniter with a hair dryer.

Hopefully, you can now turn on your stove and have your oven working again. Before doing this, however, you should disconnect the appliance from its power source. Often, this involves unplugging the oven and turning off the circuit breaker.

Once the ignition switch is removed, the burner cap should be lifted off. You should then give the burner a good cleaning.

Check the control board

If your stove or oven won’t turn on, you may have a control board problem. Checking your control board can be a fairly easy process. However, if the fault persists, it’s best to consult a trained repair professional.

The electronic control board is a device that manages the functions of an electric or gas range. It sends electricity to the bake and broil elements on electric ranges, and the safety valve on gas ranges.

Typically, the control board is located behind the stove’s control panel. You can either remove the top panel or slide it into place. A few tests are necessary before replacing the control board.

First, you will need to test the heat switch. A broken or faulty switch can lead to heating element problems. To test the heat switch, unplug the range from its power source and wait for at least 60 seconds before reconnecting.

Next, you’ll need to check the igniter. In many cases, the igniter is a solid state block, but you can also have a defective wire or a broken module.

The fuse can break as well. When the fuse breaks, the ignition wire can short out, which causes the stove to stop working.

Finally, you will need to check the wiring harness. This is the cable that connects the igniter module to the burner controls. Sometimes, the wire is wet or shorted, which causes the stove to not work.

If these tests haven’t solved your problem, it might be time to replace the electronic control board. If you have no idea where to start, you can find a guide online.

Fortunately, replacing the control board is a relatively easy task. Having a local technician do it for you can save you a lot of time.

Inspect the surface burner element

If your stove is not heating up, it may have a problem with the surface burner element. The element can be inspected for damage or wear. A faulty switch or other component can also cause the element to malfunction.

The surface element is a ribbon coil that uses electrical current to produce heat. Its function is to control the temperature of the stove. In a normal cook cycle, it performs 90% of the heating.

Damage to the surface element can also prevent the burner from shutting off properly. To inspect the element, remove the main top of the appliance. You can use a fine grain sandpaper to remove any rust or grease that’s built up on the surface. Rinse the area with water and dry it thoroughly before using it again.

If you notice a hot spot on the burner, you should check the gas orifice. If you see a rusty or dirty gas orifice, clean it out with warm soapy water. Allow the residue to dry completely before using the stove again.

In addition, if the element appears to have burn marks, you should replace the element. This will ensure that the burner heats up and stays at the proper temperature.

If you find that your burner switch is not functioning, you should take your electric stove to the nearest repair shop. An expert should be able to test and repair the switch.

In addition to testing the surface burner element, you should also test your oven. If you have a glass top range, you should remove the glass and check the burners. Some owners might need to disconnect the wires from the element to do this.

Inspect the oven safety valve

If your stove is not turning on properly, you need to inspect the oven safety valve. This is a safety mechanism that prevents gas from flowing into the oven if the gas supply is interrupted. To test this, disconnect the power to the stove.

A good way to do this is with a multimeter. Set the multimeter to the “Rx1” position. Touch the terminals of the gas safety valve with the multimeter probe to measure for continuity.

If the circuit breaker is not tripped, the problem is most likely with the oven’s control board. It can be difficult to determine whether the control board is the culprit. However, it is a common cause of oven failure.

The control board contains many elements. Each element needs to be tested for proper operation. Usually, you need to dismantle the back panel of the oven to do this. You may also need to take a look at the wiring for any burnt wires or damaged cords.

Another common issue that can prevent your oven from turning on is a faulty thermal fuse. The thermal fuse is a fuses that will trip if the temperature of the oven exceeds a certain threshold. For example, if the temperature reaches 100 degrees Fahrenheit, the thermal fuse will trip.

If the thermal fuse is tripped, you need to contact a repair technician for further testing. They can replace it and fix the problem.

A defective spark electrode can be more complicated to diagnose. You will need to check the polarity of the burner as well as the polarity of the power outlet.

Other factors that can contribute to the problem of an oven not turning on include a defective electronic control board, loose wires, and a faulty thermostat. Thankfully, all of these can be addressed by a professional.

Inspect the oven control board for signs of burning or shorts

If you are having problems with your oven, there are several things you can check. First, you should check for signs of burning or shorts on the oven control board. Then, you can test the heating elements. Lastly, you should test the thermostat.

The oven control panel has many different relays and components. These can fail at any time. You can test these components with a multimeter. This will give you an idea if the circuit is working properly.

Ideally, you should be able to check all of the components on the control board. If they aren’t functioning, you can replace them. However, this is not very practical.

Luckily, if you don’t have any electrical knowledge, you can still inspect the oven for burning or shorts. But you may need to turn off the power in your electrical panel first.

Another thing you can do is disconnect the wires of the thermostat. It’s recommended that you do this before you start checking the wires for damage. Otherwise, you risk electric shocks.

Also, you’ll want to check the limit switch on your oven. A defective limit switch can cause your oven to shut off.

In addition to the limit switch, your oven has a thermal fuse. This fuse protects against overheating and electrical overloads. It’s located between the incoming hot wire and the control panel.

Before you check the oven, you’ll want to make sure that the power supply wires are in good shape. If you notice that they are frayed, it’s a sign that the wires are prone to short circuits. When you remove the wires, you should also check the connection of the thermostat to the control panel.

Among the most popular cities that our techs service in Gwinnett County Community Service Area include the following:

Peachtree Corners, Lawrenceville, Duluth, Lilburn, Berkeley Lake, Buford, Grayson, Braselton, Mountain Park, Dacula, Rest Haven, Norcross, Suwanee, Centerville, Snellville, Sugar Hill

Tap to CALL